Tokmet
Toggle Navigation
  • Home
  • DENTAL LAB FURNACES
  • Support
  • About
  • ISO 9001:2015
  • Galery
  • Contact

DENTAMATIC 500 Chameleon MX

  • General Details
  • Features
  • Specifications
  • Support

General Details

Dentamatic MX500

DENTAMATIC 500 Chameleon MX is a fully automated vacuum furnace for drying and baking of ceramics with or without vacuum. This furnace is suitable for metal less working. Also, the furnace is possible to be controlled from PC. As stand alone unit furnace can store up to 100 different programs. The furnace can be connected to Personal Computer (PC) where unlimited number of programs can be stored.

Features

  • precise temperature control
  • platinum thermocouple
  • LCD display
  • automatic temperature calibration after each program start
  • programmable standby temperature
  • programmable drying and cooling
  • temperature speed up to 200°C/min
  • vacuum control by time, temperature and both
  • electronic vacuum level control
  • long life quartz protected heater
  • enameled steel chamber for better vacuum
  • temperature correction for each program from –25 to +25 ° C
  • 100 freely programs
  • program time up to 10 hours
  • diagnostics for easy troubleshooting
  • power failure and runaway protection
  • program protection against heater damage, in case of thermal sensor failure
  • suitable for metal free ceramics and titanium
  • operation in °C or ° F
  • vacuum level in Bar, cmHg or InHg
  • PC Control
  • very small work place only 225/225mm
  • estimated life-expectancy of the muffle and the heater (quartz) – 10 years,
    if the temperature used is up to1000°C

Specifications

Electrical:

  • Power Supply – AC 220V/50,60Hz or 110V/60Hz
  • Admissible variation of the supply voltage +10, – 5%
  • Maximum Power Consumption (without pump) – 1350W
  • Average power consumption in operation–approx. 300 W
  • Pump power consumption – max 300 W

Mechanical:

  • Overall dimensions 530mm/230mm/230mm;
  • Weight – approx. 12.5 kg;
  • Diameter of the working chamber 92 mm
  • Height of the working chamber – 80 mm

Operational:

  • Maximum temperature 1150°C (1200°C option );
  • Maximum rate of temperature increase 200°C/min ;
  • Controllable Stand By mode (Idle) 100-700°C;
  • Operation in °C or °F ;
  • Electronic vacuum level control
  • Operation in Bar, cmHg or InHg;
  • Number of programs 100;

Environmental :

  • Storage temperature : 1°C – 50°C;
  • Operation temperature : 10°C – 50°C
  • Relative humidity: up to 80%
  • Altitude up to 2000m
  • No need to run night program
  • Average life-expectancy of the muffle and the heater (quartz protected) – 10 years

Support

DENTAMATIC 500 Chameleon MX
User Manual

D500MX Manual En Download

Dentamatic MX 500 Chameleon BG Download

Dentamatic  MX 500 Chameleon Russian Download

Dentamatic MX 500 Chameleon Turkish Download

Dentamatic MX 500 Chameleon Manuale_forno_ITALIANO Download

 

Firmware update for DENTAMATIC 500

Chameleon MX version 1.74

 

Firmware update for DENTAMATIC 500

Chameleon MX version 1.77

 

PC Software for D500
Chameleon MX

Short instruction for installation of software

 

D500MX174.ZIP

 

 

D500MXUpdate177.ZIP

 

 

DmChamMXSoftware.rar

 

Installation

  • You are here:  
  • Home
  • DENTAMATIC 500 Chameleon MX

All content and graphics on this site Copyright © 2000 - 2015 TOKMET
TOKMET and DENTAMATIC are trademarks of TOKMET, LLC
Web site development and maintenance by PC Help Solutions Ltd.

Back to Top

© 2023 Tokmet